Page tree
Skip to end of metadata
Go to start of metadata

Changing the IP and DNS of your Lumeta System can be done from the CLI.

Update DNS

  • Log into the Lumeta Systems via ssh using a shell or application like putty
  • To update DNS with static addressing
    • Type: system dns manual and provide a coma separated list of DNS IP addresses.  For example: system dns manual 8.8.8.8,8.8.4.4
  • To update DNS with DHCP addressing
    • Type: system dns dhcp

Update Interface Network Information

  • Log into the Lumeta Systems via ssh using a shell or application like putty
  • First we need to know the interface name: At CLI type system interface list to obtain interface name; eth0, eth1
  • To update Network Information with static addressing
    • Type system interface configure "interface" manual and provide IP, netmask, and Gateway.  For example: system interface configure eth0 manual 10.7.8.20 255.255.255.0 10.7.8.1
  • To update Network Information with DHCP addressing
    • Type system interface configure "interface" dhcp

Scout Network Changes Final Steps

  • If the Scout Network was changed, the scout will needed to be deleted and re-added from the Command Center UI
  • Update Zones accordingly re-adding the updated scout to the collectors
  • It is recommended to reboot the scout in order for the Command Center UI to properly display the Scout DNS Updates. 
  • No labels
Write a comment...