A Lumeta admin or superuser can configure connectivity between the Lumeta Command Center and the BlueCat server to compare and share IP address management findings.
Log in to Lumeta as an admin or any user with privileges.
On the main menu, browse to Settings > Integrations > Other Solutions > BlueCat.
Complete the configuration form and click Submit.
Field Description Polling Interval How often (in hours) Lumeta should poll the BlueCat gateway Server Name The server name or IP address of the BlueCat gateway Username
User account to the BlueCat gateway
Password Password to the BlueCat gateway Retrieve Configurations Fetches network configurations from the gateway Add unmanaged devices with no network block defined
- Select to create a new device in BlueCat Address Manager (BAM) even when there is not a container network address block for the device.
Clear to NOT create a device in BlueCat Address Manager (BAM) when a container block does not exist for the device.
No zones are enabled
No assets will be pushed to BAM
One zone is enabled however, no configuration is selected under BlueCat Configuration Name
User has to select a configuration in order to push assets to BAM. No assets will be pushed to BAM
One zone and one configuration is selected
Lumeta would identify all ip addresses discovered under selected zone and add ip addresses under selected configuration
Two zones and two configurations are selected Lumeta would identify all ip addresses discovered under selected zones and add ip addresses under selected configuration for the ip address that don't exist in selected configuration for that zone
Enable the integration by toggling the Active control from red to blue.
The message "Product configured properly" will display.
Install the BlueCat Plug-in if you have not done so already.
Review the results on the BlueCat Management dashboard.