Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

A Lumeta admin or superuser can configure connectivity between the Lumeta Command Center and the BlueCat server to compare and share IP address management findings.

Here's how:

  1. Log in to Lumeta as an admin or any user with superuser privileges.

  2. On the main menu, browse to Settings > Integrations  > Other Solutions > BlueCat.

  3. Complete the configuration form and click Submit.

    FieldDescription
    Polling IntervalHow often (in hours) Lumeta should poll the BlueCat gateway
    Server NameThe server name or IP address of the BlueCat gateway
    Username

    User account to the BlueCat gateway

    PasswordPassword to the BlueCat gateway
    Add unmanaged devices with no network block defined
    • Select to create new addresses in BlueCat Address Manager (BAM) without network address blocks.
    • Clear to create new addresses in BlueCat Address Manager (BAM) with network address blocks.

  4.  Enable the integration by toggling the Active control from red to blue.
    The message "Product configured properly" will display.

Install the BlueCat Plug-in if you have not done so already. 

Review the results on the BlueCat Integration dashboard.





  • No labels