Page tree

Lumeta superusers can use the CEF logging feature to send syslog output to an external viewer in a common-event format. By enabling it, all event notifications to which the superuser has subscribed can be displayed in one preferred Security Information and Event Management (SIEM) viewer such as HP ArcSight, Splunk, or QRadar.

CEF Notifications are either system-related or device-related. The system-related notifications are global and pertain to all of Lumeta. Device notifications pertain to a particular zone. Subscribe to receive notifications at Settings > Lumeta Systems > CEF Notifications > System and Device tabs.

  • System notices report when an Agent, Collector, Scout, or Zone has been created, started or stopped. They also alert on license status (e.g., reminder, warning, and violation).
  • Device notices report findings about your network architecture such as when a device, edge, or node has been discovered, updated, or removed.

This section provides an example of integrating to the representative event manager HP ArcSight. 

Configure CEF Server

Enable the CEF logging feature to make Lumeta compile all subscribed event notifications to a logging server. Here's an example of how to enable logging to a HP ArcSight console via the Lumeta graphical user interface (GUI) or the Lumeta command-line interface (CLI).

Configure CEF Server via GUI

  1. Log in Lumeta.
  2. Select Settings > Lumeta Systems.
  3. Click the CEF Notifications tab. 
  4. Identify the logging server to which you want to send event notifications.
    1. Protocol: Type TCP-IPv4, UDP-IPv4, TCP-IPv6, UDP-IPv6 
      Note: Use TCP-IPv4 or UDP-IPv4 for HP ArcSight.) 

    2. Host Name or IP Address: Must be an IPv4-type IP address 

    3. Port number: Must be a valid integer

  5. When you are ready to send CEF-formatted event notifications, click the CEF Enabled checkbox.
  6. Click Submit.
    A message displays, indicating that your configuration settings were saved.
    Lumeta is now configured to display CEF-formatted syslog output in your ArcSight console.

Configure CEF Server via CLI

  1. Log in the Command-Line Interface (CLI).
    1. Open a host or server that supports SSH.  
    2. At the prompt, type ssh admin@<yourservername> and press Enter.
    3. Enter your password (i.e., admin) and press Enter.
  2. At the command prompt, type  

    log cefserver <enable/disable> <protocol> <IP address> <port number> and press Enter.

    1. Protocol: Type TCP-IPv4, UDP-IPv4, TCP-IPv6, UDP-IPv6  (Note:  Use TCP-IPv4 or UDP-IPv4 for HP ArcSight.) 

    2. IP Address: Must be an IPv4-type IP address 

    3. Port number: Must be a valid integer 

    4. Enable: Enables the CEFserver 

    5. Disable: Disables the CEFserver

Lumeta is now configured to display CEF-formatted syslog output in your HP ArcSight console.

Configuring CEF-Formatted Syslog Output

  1. On the CEF Notifications tab, click the tab for the type of CEF Notifications to which you want to subscribe: either System or Device.
  2. To edit the prioritization of the event and whether you subscribe to it, click Edit and update the form.
    1. Subscribed: Indicates whether or not you've opted to send notifications of the particular event type. 
    2. Name: Name of the event 
    3. Priority: Indicates level of severity: informational, alert, or warning. 
    4. Event Type: The Event Type is the predefined category of event.
  3. To Add a device notification, click Add and update the form.
  4. To apply additional filters to your device notifications, update this form:

CEF Output

Header Syntax
<syslogheader> CEF:Version|Device Vendor|Device Product|Device Version|Signature ID|Name|Severity

Header Sample
22 Jul 2014 13:28:59 grog CEF:0|Lumeta|Lumeta|3.2.4.9086|DEVICE_DISCOVERED|Device Discovered|5

Message Sample
msg=Device stealth:c:3038:1 created.

Lumeta-specific Fields
The message is followed by Lumeta specific custom fields mapped to CEF attributes. All custom fields are appended after "msg."

CEF Event Mapping

Following is a CEF notification and how it maps to custom fields in Lumeta.

0|Lumeta|Lumeta|3.2.4.9086|DEVICE_DISCOVERED| Device Discovered |5|msg=Device stealth:c:3038:1 created. cat= DISCOVERY dvchost=CCM-AMC rt=Nov 02 2017 13:19:55 cn1=1 cn1Label=Facility Zone1 dhost= c6a3= mac=


Lumeta Custom Fields

CEF Key Name

Full Name

DataType

Lumeta name

Mapping to a notification from Lumeta

Device Vendor

 

 

Lumeta

Lumeta

Device Product

 

 

Lumeta

Lumeta

Device Version

 

 

2.1 (version of Lumeta) 

3.2.4

Signature ID

 

String or integer

Notification Type

DEVICE_DISCOVERED

Name

 

String

NotificationName/NotificationType

Device Discovered

Severity

 

Integer

1, 5, 10

5

cat

deviceEventCategory

String

DISCOVERY("/discovery"),
 SYSTEM("/system"),
 CONFIG("/config")

DISCOVERY

deviceMacAddress

deviceMacAddress

MAC Address

mac

 

dvc

deviceAddress

IPV4 Address

ip

 

rt

 receiptTime

TimeStamp

event.getTimeStamp()

Nov 02 2017 13:19:55

dvchost

deviceHostName

String

systemName

CCM-AMC

dhost

destinationHostName

String

ip

c6a3

c6a3

destination format

IPv6

ip

 

suser

sourceUserName

String

userName

 

cn1

deviceCustomNumber1

Long

zoneId

1

cn1Label

deviceCustomNumber1Label

String

zoneName

Facility Zone1

CEF Event Type

Description

Sample Message

AGENT_CONNECTED

A connection was created between discovery-agent and lumeta-webapp

Discovery Agent Connected

 

AGENT_START

Displays one of the following Agent and that it has started: TCP Port Scanner|Host Discovery|Snmp Hunter|Snmp Scanner|Path Scanner|Broadcast Discovery|CIFSScanner|DNSScanner|Http Scanner|Leak Discovery

Host Discovery (or any other agent name) Started

Agents: TCP Port Scanner|Host Discovery|Snmp Hunter|Snmp Scanner|Path Scanner|Broadcast Discovery|CIFSScanner|DNSScanner|Http Scanner|Leak Discovery

AGENT_STATUS

Displays the Agent Name (to show that the Agent is currently running): TCP Port Scanner|Host Discovery|Snmp Hunter|Snmp Scanner|Path Scanner|Broadcast Discovery|CIFSScanner|DNSScanner|Http Scanner|Leak Discovery

Host Discovery (or any other agent name)

AGENT_STOP

Displays one of the following Agent and that it has stopped: TCP Port Scanner|Host Discovery|Snmp Hunter|Snmp Scanner|Path Scanner|Broadcast Discovery|CIFSScanner|DNSScanner|Http Scanner|Leak Discovery

Host Discovery (or any other agent name) Stopped

COLLECTOR_CREATED

New Lumeta Collector created containing device discovery configuration

Collector <>  created

COLLECTOR_REMOVED

Indicated existing Lumeta Collector has been removed

Collector <> removed

COLLECTOR_UPDATED

Updated discovery configuration was applied to a Lumeta Collector

Collector <> Config Inserted

DEVICE_ACTIVITY

Discovered device’s status has changed from active to inactive (or vice versa)

Device <> became active. Earlier state : inactive  OR

Device <> became inactive. Earlier state : active

DEVICE_DISCOVERED

New entry for a Device discovered. Multiple entries for each scan technique

Device<>created

DEVICE_PROFILED

Discovered device’s profile information has changed. Profile information includes device type, operating system, operating system version and vendor.

Device<>profileattributeschanged:DeviceType=<>,OS=<>,Vendor=<>,Version=<>|2017-11-0709:24:13.384338

DEVICE_REMOVED

Discovered device has become inactive and removed

Device<>removed

DEVICE_UPDATED

Discovered Device has been updated with new information. Multiple entries for each scan technique.

Device<>updated.IPassignedto<>|IPchangedto<>

FORWARDER_
DISCOVERED

Discovered device has been identified as a forwarding device based on TTL

Device<>forwardstraffic

JOB_COMPLETED

Displays status of a background job that was deployed on the Lumeta box (example: importing pattern file, importing zone attributes)

Job Success ( jobId : 1, jobName : importPatterns-job )

JOB_STARTED

Displays initialization of a background job that was deployed on the Lumeta box (example: importing pattern file, importing zone attributes)

Job Started (jobId : 1, jobName : importPatterns-job)

LEAK_DISCOVERED

Lumeta has identified a potential Leak Path to / from a protected network

 

LICENSE_REMINDER

User notification that the Lumeta license is about to expire

License expiration imminent –
contact support@lumeta.com

LICENSE_VIOLATION

User notification that the Lumeta license has exceeded the IP Count

License expired – new license required – contact support@lumeta.com | | IP count exceeded – contact support@lumeta.com

LICENSE_WARNING

User notification that the Lumeta license is approaching the IP Count limit

License expired – contact support@lumeta.com | IP count exceeded – contact support@lumeta.com

LINK_DISCOVERED

Path has been discovered between two IPs

Linkdiscoveredbetween<>and<>

LOGLEVEL_UPDATED

Log level has been changed to INFO/WARN/DEBUG

Service <> log level set to <> 

NOTIFICATION_
ACKNOWLEDGED

Displays the Notification ID that was acknowledged by the user on Lumeta System’s map.

Notification<notificationnumber>acknowledged

NOTIFICATION_
ACKNOWLEDGED
_ALL

All Notifications on Lumeta System’s map have been acknowledged for a specific priority.

AllNotificationsacknowledgedforpriority
<INFO|WARN|ALERT>

OPENPORT_
DISCOVERED

Discovered Device has been found with an open port

 

ROUTER_DISCOVERED

Discovered Device is now profiled as a router

 

ROUTER_REMOVED

Discovered Device that was profiled as a router has now been removed

 

SYSTEM_CONNECT

User notification that a connection has been created between CC <-> Portal, CC <-> Scout

Peer connection established (<> <-> <>)

SYSTEM_DISCONNECT

User notification that a disconnection occured between CC <-> Portal, CC <-> Scout

Peer connection closed (<> <-> <>)

UPDATE_ERROR


 

UPDATE_REMOTE

 

 

UPDATE_STEP


 

UPDATE_WARNING


 

USER_CREATED

New Lumeta user was created

User <> created

USER_REMOVED

Lumeta user was deleted

User <> removed

USER_UPDATED

Changes were made to an existing Lumeta user

User <> updated

ZONE_CREATED

New Lumeta Zone created containing device discovery configuration

Created zone. (name <>, description = <>,
updatenotes = "time"=>"2017-11-07 13:35:07.257405-05"

ZONE_REMOVED

Indicated existing Lumeta Zone has been removed

Deleted zone. (name = <>, description = <>,
updatenotes = "time"=>"<>", "user"=>"<>")

ZONE_UPDATED

Updated discovery configuration was applied to a Lumeta Zone

Zone <> CIDRs Updated




  • No labels