Enabling the NetFlow Capture Service

The NetFlow-capture service enables your Lumeta Command Center to ingest NetFlow data.

To enable NetFlow capture from the Lumeta GUI:

1. On the Lumeta main menu, browse to Settings > Support Tools > Status of Lumeta Components.
2. Start the Netflow Packet Capture Service and click Run.
   
   The status of the service will change to Running.

To enable NetFlow capture from the Lumeta command-line interface:

1.  Log in to the CLI.
2. At the command-line prompt, enter support service packetcapture start.
3. Exit the CLI.