Connecting an Lumeta Scout- Disconnecting an Lumeta Scout
- Identifying Your Local System & Connected Scout
- Upgrading an Lumeta Scout
To monitor a remote zone, connect an Lumeta Scout as follows: To stop monitoring a remote zone, disconnect the Lumeta Scout. Disconnect all Scouts before upgrading to a new version of Lumeta. Open the System tab to display the information on your installation including its system name, type (e.g., Command Center or Scout), version, user identifier (UUID), initiator, and last connection time. Connecting an Lumeta Scout
Note: "Lumeta" was formerly known as "Spectre."
The systems connect and information about the remote system's name, version, and UUID display. Disconnecting a Scout
Identifying Your Local System & Connected Scout
System information, license information, interface information, and any CEF information for that Lumeta system displays in the adjacent panes.
Upgrading an Lumeta Scout
Before upgrading a Scout, download the upgrade file you need to your local system.
To upgrade from the Lumeta browser interface:
- Browse to the system name or IP address of your Scout (e.g., 10.9.0.42).
- Click Ugrade and upload the Scout upgrade package from your local system.
To upgrade a Scout from its CLI:
- Login to your Lumeta 3.0 Scout via ssh.
- Run the CLI command:
system upgrade <path to the upgrade file>.